STIGQter: STIG Summary: Google Android 9.x Security Technical Implementation Guide Version: 1 Release: 1 Benchmark Date: 23 Aug 2019:

The Google Android Pie must be configured to not allow more than 10 consecutive failed authentication attempts.

DISA Rule

SV-106417r1_rule

Vulnerability Number

V-97313

Group Title

PP-MDF-301050

Rule Version

GOOG-09-000500

Severity

CAT III

CCI(s)

• CCI-000044 - The information system enforces the organization-defined limit of consecutive invalid logon attempts by a user during the organization-defined time period.

Weight

10

Fix Recommendation

Configure the Google Android device to allow only 10 or fewer consecutive failed authentication attempts.

On the MDM Console:
1. Open password requirements.
2. Open device password section.
3. Set "Maximum Number of Failed Attempts" to a number between 1 and 10.

Check Contents

Review Google Android device configuration settings to determine if the mobile device has the maximum number of consecutive failed authentication attempts set at 10 or fewer.

This validation procedure is performed on both the MDM Administration Console and the Android Pie device.
On the MDM console, do the following:

1. Open password requirements.
2. Open device password section.
3. Review the policy configuration that was pushed down to the device and ensure the "Maximum Number of Failed Attempts" is set between 1 and 10.

On the Android Pie device, do the following:
1. Open Setting >> Security & location >> Managed device info
2. Verify "Failed password attempts before deleting all device data" is set to 10 or fewer attempts .

If the MDM console device policy is not set to the maximum number of consecutive failed authentication attempts at 10 or fewer or on the Android Pie device, the device policy is not set to the maximum number of consecutive failed authentication attempts at 10 or fewer, this is a finding.

Vulnerability Number

V-97313

Documentable

False

Rule Version

GOOG-09-000500

Severity Override Guidance

Review Google Android device configuration settings to determine if the mobile device has the maximum number of consecutive failed authentication attempts set at 10 or fewer.

This validation procedure is performed on both the MDM Administration Console and the Android Pie device.
On the MDM console, do the following:

1. Open password requirements.
2. Open device password section.
3. Review the policy configuration that was pushed down to the device and ensure the "Maximum Number of Failed Attempts" is set between 1 and 10.

On the Android Pie device, do the following:
1. Open Setting >> Security & location >> Managed device info
2. Verify "Failed password attempts before deleting all device data" is set to 10 or fewer attempts .

If the MDM console device policy is not set to the maximum number of consecutive failed authentication attempts at 10 or fewer or on the Android Pie device, the device policy is not set to the maximum number of consecutive failed authentication attempts at 10 or fewer, this is a finding.

Check Content Reference

M

Target Key

3499

Comments