STIGQter: STIG Summary: Google Android 10.x Security Technical Implementation Guide Version: 1 Release: 2 Benchmark Date: 24 Jan 2020:

Google Android 10 must be configured to enable a screen-lock policy that will lock the display after a period of inactivity.

DISA Rule

SV-108029r1_rule

Vulnerability Number

V-98925

Group Title

PP-MDF-301030

Rule Version

GOOG-10-000300

Severity

CAT II

CCI(s)

• CCI-000057 - The information system initiates a session lock after the organization-defined time period of inactivity.

Weight

10

Fix Recommendation

Configure the Google Android device to enable a screen-lock policy that will lock the display after a period of inactivity.

On the MDM Console:
1. Open password requirements.
2. Open device password section.
3. Set "Max time to screen lock" to any number desired. Units are in Seconds.

Check Contents

Review Google Android device configuration settings to determine if the mobile device is enforcing a screen-lock policy that will lock the display after a period of inactivity.

This validation procedure is performed on both the MDM Administration Console and the Android 10 device.

On the MDM console, do the following:
1. Open password requirements.
2. Open device password section.
3. Ensure "Max time to screen lock" is set to any number desired. Units are in Seconds.

On the Android 10 device, do the following:
1. Open Settings >> Display.
2. Tap "Screen timeout".
3. Ensure the Screen timeout value is set to the desired value and cannot be set to a larger value.

If the MDM console device policy is not set to enable a screen-lock policy that will lock the display after a period of inactivity or on the Android 10 device, the device policy is not set to enable a screen-lock policy that will lock the display after a period of inactivity, this is a finding.

Vulnerability Number

V-98925

Documentable

False

Rule Version

GOOG-10-000300

Severity Override Guidance

Review Google Android device configuration settings to determine if the mobile device is enforcing a screen-lock policy that will lock the display after a period of inactivity.

This validation procedure is performed on both the MDM Administration Console and the Android 10 device.

On the MDM console, do the following:
1. Open password requirements.
2. Open device password section.
3. Ensure "Max time to screen lock" is set to any number desired. Units are in Seconds.

On the Android 10 device, do the following:
1. Open Settings >> Display.
2. Tap "Screen timeout".
3. Ensure the Screen timeout value is set to the desired value and cannot be set to a larger value.

If the MDM console device policy is not set to enable a screen-lock policy that will lock the display after a period of inactivity or on the Android 10 device, the device policy is not set to enable a screen-lock policy that will lock the display after a period of inactivity, this is a finding.

Check Content Reference

M

Target Key

3581

Comments