STIGQter: STIG Summary: Cisco IOS Router RTR Security Technical Implementation Guide Version: 2 Release: 1 Benchmark Date: 23 Oct 2020:

The Cisco BGP router must be configured to reject route advertisements from CE routers with an originating AS in the AS_PATH attribute that does not belong to that customer.

DISA Rule

SV-216603r531085_rule

Vulnerability Number

V-216603

Group Title

SRG-NET-000018-RTR-000010

Rule Version

CISC-RT-000550

Severity

CAT III

CCI(s)

• CCI-000032 - The information system enforces information flow control using organization-defined security policy filters as a basis for flow control decisions for organization-defined information flows.

Weight

10

Fix Recommendation

This requirement is not applicable for the DODIN Backbone.

Configure the router to reject updates from CE routers with an originating AS in the AS_PATH attribute that does not belong to that customer.

Step 1: Configure the as-path ACL as shown in the example below:

R1(config)#ip as-path access-list 10 permit ^yy$
R1(config)#ip as-path access-list 10 deny .*

Step 2: Apply the as-path filter inbound as shown in the example below:

R1(config)#router bgp xx
R1(config-router)#neighbor x.1.4.12 filter-list 10 in

Check Contents

This requirement is not applicable for the DODIN Backbone.

Review the router configuration to verify the router is configured to deny updates received from CE routers with an originating AS in the AS_PATH attribute that does not belong to that customer.

Step 1: Review router configuration and verify that there is an as-path access-list statement defined to only accept routes from a CE router whose AS did not originate the route. The configuration should look similar to the following:

ip as-path access-list 10 permit ^yy$
ip as-path access-list 10 deny .*

Note: the characters “^” and “$” representing the beginning and the end of the expression respectively are optional and are implicitly defined if omitted.

Step 2: Verify that the as-path access-list is referenced by the filter-list inbound for the appropriate BGP neighbors as shown in the example below:

router bgp xx
neighbor x.1.4.12 remote-as yy
neighbor x.1.4.12 filter-list 10 in

If the router is not configured to reject updates from CE routers with an originating AS in the AS_PATH attribute that does not belong to that customer, this is a finding.

Vulnerability Number

V-216603

Documentable

False

Rule Version

CISC-RT-000550

Severity Override Guidance

This requirement is not applicable for the DODIN Backbone.

Review the router configuration to verify the router is configured to deny updates received from CE routers with an originating AS in the AS_PATH attribute that does not belong to that customer.

Step 1: Review router configuration and verify that there is an as-path access-list statement defined to only accept routes from a CE router whose AS did not originate the route. The configuration should look similar to the following:

ip as-path access-list 10 permit ^yy$
ip as-path access-list 10 deny .*

Note: the characters “^” and “$” representing the beginning and the end of the expression respectively are optional and are implicitly defined if omitted.

Step 2: Verify that the as-path access-list is referenced by the filter-list inbound for the appropriate BGP neighbors as shown in the example below:

router bgp xx
neighbor x.1.4.12 remote-as yy
neighbor x.1.4.12 filter-list 10 in

If the router is not configured to reject updates from CE routers with an originating AS in the AS_PATH attribute that does not belong to that customer, this is a finding.

Check Content Reference

M

Target Key

4027

Comments