STIGQter: STIG Summary: Cisco IOS XE Switch NDM Security Technical Implementation Guide Version: 2 Release: 1 Benchmark Date: 23 Oct 2020:

The Cisco switch must be configured to generate an alert for all audit failure events.

DISA Rule

SV-220548r531084_rule

Vulnerability Number

V-220548

Group Title

SRG-APP-000360-NDM-000295

Rule Version

CISC-ND-001000

Severity

CAT II

CCI(s)

• CCI-001858 - The information system provides a real-time alert in an organization-defined real-time period to organization-defined personnel, roles, and/or locations when organization-defined audit failure events requiring real-time alerts occur.

Weight

10

Fix Recommendation

Configure the Cisco switch to send critical to emergency log messages to the syslog server as shown in the example below:

4(config)#logging host x.x.x.x
SW4(config)#logging trap critical

Note: The parameter "critical" can replaced with a lesser severity level (i.e., error, warning, notice, informational).

Check Contents

Review the Cisco switch configuration to verify that it is compliant with this requirement as shown in the example below:

logging trap critical
logging x.x.x.x

Note: The parameter "critical" can replaced with a lesser severity level (i.e. error, warning, notice, informational). Informational is the default severity level; hence, if the severity level is configured to informational, the logging trap command will not be shown in the configuration.

If the Cisco switch is not configured to generate an alert for all audit failure events, this is a finding.

Vulnerability Number

V-220548

Documentable

False

Rule Version

CISC-ND-001000

Severity Override Guidance

Review the Cisco switch configuration to verify that it is compliant with this requirement as shown in the example below:

logging trap critical
logging x.x.x.x

Note: The parameter "critical" can replaced with a lesser severity level (i.e. error, warning, notice, informational). Informational is the default severity level; hence, if the severity level is configured to informational, the logging trap command will not be shown in the configuration.

If the Cisco switch is not configured to generate an alert for all audit failure events, this is a finding.

Check Content Reference

M

Target Key

4067

Comments