STIGQter STIGQter: STIG Summary: Cisco IOS-XE Switch RTR Security Technical Implementation Guide Version: 2 Release: 1 Benchmark Date: 23 Apr 2021:

The Cisco switch must be configured to produce audit records containing information to establish where the events occurred.

DISA Rule

SV-221004r622190_rule

Vulnerability Number

V-221004

Group Title

SRG-NET-000076-RTR-000001

Rule Version

CISC-RT-000210

Severity

CAT II

CCI(s)

Weight

10

Fix Recommendation

Configure the switch to log events containing information to establish where the events occurred as shown in the example below:

SW1(config)#ip access-list extended INGRESS_FILTER



SW1(config-ext-nacl)#deny ip any any log-input

Check Contents

Review the switch configuration to verify that events are logged containing information to establish where the events occurred as shown in the example below:

ip access-list extended INGRESS_FILTER
permit tcp any any established
permit tcp host x.11.1.1 eq bgp host x.11.1.2
permit tcp host x.11.1.1 host x.11.1.2 eq bgp
permit tcp any host x.11.1.5 eq www
permit icmp host x.11.1.1 host x.11.1.2 echo
permit icmp any any echo-reply



deny ip any any log-input

Note: When the log-input parameter is configured on deny statements, the log record will contain the interface where ingress packet has been dropped.

If the switch is not configured to produce audit records containing information to establish to establish where the events occurred, this is a finding.

Vulnerability Number

V-221004

Documentable

False

Rule Version

CISC-RT-000210

Severity Override Guidance

Review the switch configuration to verify that events are logged containing information to establish where the events occurred as shown in the example below:

ip access-list extended INGRESS_FILTER
permit tcp any any established
permit tcp host x.11.1.1 eq bgp host x.11.1.2
permit tcp host x.11.1.1 host x.11.1.2 eq bgp
permit tcp any host x.11.1.5 eq www
permit icmp host x.11.1.1 host x.11.1.2 echo
permit icmp any any echo-reply



deny ip any any log-input

Note: When the log-input parameter is configured on deny statements, the log record will contain the interface where ingress packet has been dropped.

If the switch is not configured to produce audit records containing information to establish to establish where the events occurred, this is a finding.

Check Content Reference

M

Target Key

4074

Comments