STIGQter STIGQter: STIG Summary: Red Hat Enterprise Linux 8 Security Technical Implementation Guide Version: 1 Release: 2 Benchmark Date: 23 Apr 2021:

RHEL 8 must not send Internet Control Message Protocol (ICMP) redirects.

DISA Rule

SV-230536r627750_rule

Vulnerability Number

V-230536

Group Title

SRG-OS-000480-GPOS-00227

Rule Version

RHEL-08-040220

Severity

CAT II

CCI(s)

Weight

10

Fix Recommendation

Configure RHEL 8 to not allow interfaces to perform IPv4 ICMP redirects with the following command:

$ sudo sysctl -w net.ipv4.conf.all.send_redirects=0

If "0" is not the system's default value then add or update the following line in the appropriate file under "/etc/sysctl.d":

net.ipv4.conf.all.send_redirects=0

Check Contents

Verify RHEL 8 does not IPv4 ICMP redirect messages.

Note: If either IPv4 or IPv6 is disabled on the system, this requirement only applies to the active internet protocol version.

Check the value of the "all send_redirects" variables with the following command:

$ sudo sysctl net.ipv4.conf.all.send_redirects

net.ipv4.conf.all.send_redirects = 0

If the returned line does not have a value of "0", or a line is not returned, this is a finding.

Vulnerability Number

V-230536

Documentable

False

Rule Version

RHEL-08-040220

Severity Override Guidance

Verify RHEL 8 does not IPv4 ICMP redirect messages.

Note: If either IPv4 or IPv6 is disabled on the system, this requirement only applies to the active internet protocol version.

Check the value of the "all send_redirects" variables with the following command:

$ sudo sysctl net.ipv4.conf.all.send_redirects

net.ipv4.conf.all.send_redirects = 0

If the returned line does not have a value of "0", or a line is not returned, this is a finding.

Check Content Reference

M

Target Key

2921

Comments