STIGQter: STIG Summary: Juniper Router RTR Security Technical Implementation Guide Version: 2 Release: 2 Benchmark Date: 12 Feb 2021:

The Juniper perimeter router must be configured to drop IPv6 packets containing an extension header with the Endpoint Identification option.

DISA Rule

SV-233297r639663_rule

Vulnerability Number

V-233297

Group Title

SRG-NET-000364-RTR-000204

Rule Version

JUNI-RT-000385

Severity

CAT II

CCI(s)

• CCI-002403 - The information system only allows incoming communications from organization-defined authorized sources routed to organization-defined authorized destinations.

Weight

10

Fix Recommendation

Step 1: Configure a filter to block packets with either a Hop-by-Hop or Destination Option header as shown in the example.

user@R1# edit firewall family inet6
user@R1# edit filter IPV6-INGRESS-FILTER
user@R1# set term HOP_BY_HOP_HEADER from next-header hop-by-hop
user@R1# set term HOP_BY_HOP_HEADER then discard syslog
user@R1# set term DEST_ OPT_HEADER from next-header dstops
user@R1# set term DEST_ OPT_HEADER then discard syslog
user@R1# top

Step 2: Apply the filter inbound on all external IPv6-enabled interfaces.

user@R1# edit interfaces ge-0/0/0 unit 0 family inet6
user@R1# set filter input IPV6-INGRESS-FILTER
user@R1# commit

Check Contents

This requirement is not applicable for the DODIN Backbone.

Review the router configuration and determine if filters are bound to the applicable interfaces to drop all inbound IPv6 packets containing an option type values of 0x8A (Endpoint Identification) regardless of whether it appears in a Hop-by-Hop or Destination Option header.

The following example will block IPv6 packet containing either a Hop-by-Hop or Destination Option header:

family inet6 {
filter IPV6-INGRESS-FILTER {
term HOP_BY_HOP_HEADER {
from {
next-header hop-by-hop;
}
then {
syslog;
discard;
}
}
term DEST_ OPT_HEADER {
from {
next-header dstops;
}
then {
syslog;
discard;
}
}
term ALLOW_TCP_ESTABLISHED {
from {
next-header tcp;
tcp-established;
}
then accept;
}
term DENY_BY_DEFAULT {
then {
syslog;
discard;
}
}
}
}
}


Note: Currently JUNOS has no method to filter option type within either Hop-by-Hop or Destination Option header. Hence, all packets with a Hop-by-Hop or Destination Option headers must be dropped.

If the router is not configured to drop IPv6 packets containing an extension header with the Endpoint Identification option, this is a finding.

Vulnerability Number

V-233297

Documentable

False

Rule Version

JUNI-RT-000385

Severity Override Guidance

This requirement is not applicable for the DODIN Backbone.

Review the router configuration and determine if filters are bound to the applicable interfaces to drop all inbound IPv6 packets containing an option type values of 0x8A (Endpoint Identification) regardless of whether it appears in a Hop-by-Hop or Destination Option header.

The following example will block IPv6 packet containing either a Hop-by-Hop or Destination Option header:

family inet6 {
filter IPV6-INGRESS-FILTER {
term HOP_BY_HOP_HEADER {
from {
next-header hop-by-hop;
}
then {
syslog;
discard;
}
}
term DEST_ OPT_HEADER {
from {
next-header dstops;
}
then {
syslog;
discard;
}
}
term ALLOW_TCP_ESTABLISHED {
from {
next-header tcp;
tcp-established;
}
then accept;
}
term DENY_BY_DEFAULT {
then {
syslog;
discard;
}
}
}
}
}


Note: Currently JUNOS has no method to filter option type within either Hop-by-Hop or Destination Option header. Hence, all packets with a Hop-by-Hop or Destination Option headers must be dropped.

If the router is not configured to drop IPv6 packets containing an extension header with the Endpoint Identification option, this is a finding.

Check Content Reference

M

Target Key

4032

Comments