STIGQter: STIG Summary: Infoblox 8.x DNS Security Technical Implementation Guide Version: 1 Release: 1 Benchmark Date: 09 Jan 2021:

The Infoblox DNS server must authenticate to any external (non-Grid) DNS servers before responding to a server-to-server transaction.

DISA Rule

SV-233900r621666_rule

Vulnerability Number

V-233900

Group Title

SRG-APP-000394-DNS-000049

Rule Version

IDNS-8X-500003

Severity

CAT II

CCI(s)

• CCI-001958 - The information system authenticates an organization-defined list of specific and/or types of devices before establishing a local, remote, or network connection.

Weight

10

Fix Recommendation

Note that TSIG relies on both key and time synchronization. TSIG will fail if the local clocks on both names are not synchronized.

1. Navigate to the Data Management >> DNS >> Zones tab.
2. Select a zone and click "Edit". Click on the "Zone Transfers" tab and click "Override" for the "Allow Zone Transfers to" section.
3. Use the radio button to select "Set of ACEs" and the "Add" drop-down to configure a TSIG key.
4. It is important to verify that both the Infoblox and other DNS server have the identical TSIG configuration.
5. When complete, click "Save & Close" to save the changes and exit the "Properties" screen.
6. Perform a service restart if necessary.
7. Verify zone transfers are operational after configuration of TSIG.

Check Contents

1. Navigate to Data Management >> DNS >> Zones tab.
2. Review each zone by clicking "Edit" and inspecting the "Name Servers" tab.
3. If the all entries in the "Type" column are configured as "Grid", this check is Not Applicable.
4. Verify that each zone containing non-Grid name servers is further verified by inspection of the "Zone Transfers" tab and configuration of TSIG Access Control Entry (ACE).
5. When complete, click "Cancel" to exit the "Properties" screen.

If there is a non-Grid system that uses zone transfers but does not have a TSIG key, this is a finding.

Vulnerability Number

V-233900

Documentable

False

Rule Version

IDNS-8X-500003

Severity Override Guidance

1. Navigate to Data Management >> DNS >> Zones tab.
2. Review each zone by clicking "Edit" and inspecting the "Name Servers" tab.
3. If the all entries in the "Type" column are configured as "Grid", this check is Not Applicable.
4. Verify that each zone containing non-Grid name servers is further verified by inspection of the "Zone Transfers" tab and configuration of TSIG Access Control Entry (ACE).
5. When complete, click "Cancel" to exit the "Properties" screen.

If there is a non-Grid system that uses zone transfers but does not have a TSIG key, this is a finding.

Check Content Reference

M

Target Key

5251

Comments