STIGQter: STIG Summary: Honeywell Android 9.x COBO Security Technical Implementation Guide Version: 1 Release: 1 Benchmark Date: 14 Jan 2021:

The Honeywell Mobility Edge Android Pie device must be configured to disable Bluetooth or configured via User Based Enforcement (UBE) to allow Bluetooth for only HSP (Headset Profile), HFP (HandsFree Profile), or SPP (Serial Port Profile) capable devices.

DISA Rule

SV-235043r626530_rule

Vulnerability Number

V-235043

Group Title

PP-MDF-301110

Rule Version

HONW-09-001400

Severity

CAT III

CCI(s)

• CCI-000366 - The organization implements the security configuration settings.
• CCI-001761 - The organization defines the functions, ports, protocols, and services within the information system that are to be disabled when deemed unnecessary and/or nonsecure.

Weight

10

Fix Recommendation

Configure the Honeywell Android device to disable Bluetooth or if the AO has approved the use of Bluetooth (for example, for car handsfree use), train the user to connect to only authorized Bluetooth devices using only HSP, HFP, or SPP Bluetooth capable devices (User Based Enforcement [UBE]).

To disable Bluetooth use the following procedure:

On the MDM console:
1. Open Restrictions section.
2. Toggle "Disallow Bluetooth" to "On".

The user training requirement is satisfied in requirement HONW-09-008700.

Check Contents

Determine if the AO has approved the use of Bluetooth at the site.

If the AO has not approved the use of Bluetooth, verify Bluetooth has been disabled.

On the MDM console:
1. Open Restrictions section.
2. Ensure "Disallow Bluetooth" is set.

On the Honeywell Android Pie device:
1. Go to Settings >> Connected Devices >> Connection Preferences >> Bluetooth.
2. Ensure that it is set to "Off" and cannot be toggled to "On".

If the AO has approved the use of Bluetooth, on the Honeywell Android Pie device:
1. Go to Settings >> Connected Devices.
2. Verify only approved Bluetooth connected devices using approved profiles are listed.

If the AO has not approved the use of Bluetooth, and Bluetooth use is not disabled via an MDM managed device policy, this is a finding.

If the AO has approved the use of Bluetooth, and Bluetooth devices using unauthorized Bluetooth profiles are listed on the device under "Connected devices", this is a finding.

Vulnerability Number

V-235043

Documentable

False

Rule Version

HONW-09-001400

Severity Override Guidance

Determine if the AO has approved the use of Bluetooth at the site.

If the AO has not approved the use of Bluetooth, verify Bluetooth has been disabled.

On the MDM console:
1. Open Restrictions section.
2. Ensure "Disallow Bluetooth" is set.

On the Honeywell Android Pie device:
1. Go to Settings >> Connected Devices >> Connection Preferences >> Bluetooth.
2. Ensure that it is set to "Off" and cannot be toggled to "On".

If the AO has approved the use of Bluetooth, on the Honeywell Android Pie device:
1. Go to Settings >> Connected Devices.
2. Verify only approved Bluetooth connected devices using approved profiles are listed.

If the AO has not approved the use of Bluetooth, and Bluetooth use is not disabled via an MDM managed device policy, this is a finding.

If the AO has approved the use of Bluetooth, and Bluetooth devices using unauthorized Bluetooth profiles are listed on the device under "Connected devices", this is a finding.

Check Content Reference

M

Target Key

5275

Comments