STIGQter: STIG Summary: Cisco ISE NAC Security Technical Implementation Guide Version: 1 Release: 1 Benchmark Date: 13 Apr 2021:

The Cisco ISE must be configured to log records onto a centralized events server.

DISA Rule

SV-242592r714086_rule

Vulnerability Number

V-242592

Group Title

SRG-NET-000333-NAC-001340

Rule Version

CSCO-NC-000180

Severity

CAT II

CCI(s)

• CCI-001844 - The information system provides centralized management and configuration of the content to be captured in audit records generated by organization-defined information system components.

Weight

10

Fix Recommendation

Create a Remote Logging Target and direct logging to that target. To create an external logging target, complete the following steps.

1. Choose Administration >> System >> Logging >> Remote Logging Targets.
2. Click "Add".
3. Configure the following fields.
- Name - Enter the name of the new target
- Target Type - By default it is set to Syslog. The value of this field cannot be changed.
- Description - Enter a brief description of the new target.
- IP Address - Enter the IP address of the destination machine where you want to store the logs.
- Port - Enter the port number of the destination machine.
- Facility Code - Choose the syslog facility code to be used for logging. Valid options are Local0 through Local7.
- Maximum Length - Enter the maximum length of the remote log target messages. Valid options are from 200 to 1024 bytes.
4. Click "Save".

Go to the Logging Targets page and verify the creation of the new target. To edit a remote logging target, complete the following steps:

1. Choose Administration >> System >> Logging >> Remote Logging Targets.
2. Click the radio button next to the logging target name that you want to edit and click "Edit".
3. Modify the following field values on the Log Collection page as needed.
- Name
- Target Type
- Description
- IP Address
- Port
- Facility Code
- Maximum Length
4. Click "Save".

The updating of the selected Log Collector is completed.

Check Contents

To view remote logging targets, complete the following steps:

1. From the ISE Administration Interface, choose Administration >> System >> Logging >> Remote Logging Targets.
2. The Remote Logging Targets page appears with a list of existing logging targets.

If a remote logging target is not configured, this is a finding.

Vulnerability Number

V-242592

Documentable

False

Rule Version

CSCO-NC-000180

Severity Override Guidance

To view remote logging targets, complete the following steps:

1. From the ISE Administration Interface, choose Administration >> System >> Logging >> Remote Logging Targets.
2. The Remote Logging Targets page appears with a list of existing logging targets.

If a remote logging target is not configured, this is a finding.

Check Content Reference

M

Target Key

5383

Comments