STIGQter: STIG Summary: Windows Firewall with Advanced Security Security Technical Implementation Guide Version: 1 Release: 7 Benchmark Date: 27 Apr 2018:

The Windows Firewall with Advanced Security must allow outbound connections, unless a rule explicitly blocks the connection when connected to a private network.

DISA Rule

SV-54890r3_rule

Vulnerability Number

V-17429

Group Title

Windows Firewall Private - Outbound

Rule Version

WNFWA-000013

Severity

CAT II

CCI(s)

• CCI-001094 - The information system restricts the ability of individuals to launch organization-defined denial of service attacks against other information systems.

Weight

10

Fix Recommendation

The preferred method of configuring the firewall settings is with a policy, particularly in a domain environment.

Configure the policy value for Computer Configuration -> Windows Settings -> Security Settings -> Windows Firewall with Advanced Security -> Windows Firewall with Advanced Security -> Windows Firewall Properties (this link will be in the right pane) -> Private Profile Tab -> State, "Outbound connections" to "Allow (default)".

In addition to using policies, systems may also be configured using the firewall GUI or Netsh commands. These methods may be more appropriate for standalone systems.
The configuration settings in the GUI are the same as those specified in the policy above. Windows Firewall Properties will be a link in the center pane after opening Windows Firewall with Advanced Security.

The following Netsh commands may also be used to configure this setting:
"Netsh advfirewall set privateprofile firewallpolicy blockinbound,allowoutbound".
Or
"Netsh advfirewall set allprofiles firewallpolicy blockinbound,allowoutbound".
Both inbound and outbound parameters must be specified to execute this command.

Check Contents

If the firewall's Private Profile is not enabled (see V-17416), this requirement is also a finding.

If the following policy-based registry value exists and is not configured as specified, this is a finding.

Registry Hive: HKEY_LOCAL_MACHINE
Registry Path: \SOFTWARE\Policies\Microsoft\WindowsFirewall\PrivateProfile\

Value Name: DefaultOutboundAction

Type: REG_DWORD
Value: 0x00000000 (0)

If the policy-based registry value does not exist, verify the following registry value. If it is not configured as specified, this is a finding.

Registry Hive: HKEY_LOCAL_MACHINE
Registry Path: \SYSTEM\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\StandardProfile\

Value Name: DefaultOutboundAction

Type: REG_DWORD
Value: 0x00000000 (0)

Vulnerability Number

V-17429

Documentable

False

Rule Version

WNFWA-000013

Severity Override Guidance

If the firewall's Private Profile is not enabled (see V-17416), this requirement is also a finding.

If the following policy-based registry value exists and is not configured as specified, this is a finding.

Registry Hive: HKEY_LOCAL_MACHINE
Registry Path: \SOFTWARE\Policies\Microsoft\WindowsFirewall\PrivateProfile\

Value Name: DefaultOutboundAction

Type: REG_DWORD
Value: 0x00000000 (0)

If the policy-based registry value does not exist, verify the following registry value. If it is not configured as specified, this is a finding.

Registry Hive: HKEY_LOCAL_MACHINE
Registry Path: \SYSTEM\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\StandardProfile\

Value Name: DefaultOutboundAction

Type: REG_DWORD
Value: 0x00000000 (0)

Check Content Reference

M

Target Key

2565

Comments