STIGQter: STIG Summary: ArcGIS for Server 10.3 Security Technical Implementation Guide Version: 1 Release: 3 Benchmark Date: 26 Jan 2018: STIGQter: STIG Summary: ArcGIS for Server 10.3 Security Technical Implementation Guide Version: 1 Release: 3 Benchmark Date: 26 Jan 2018:SV-79967r2_rule
V-65477
SRG-APP-000223
AGIS-00-000098
CAT II
10
Configure ArcGIS for Server to ensure the application recognizes only system generated session identifiers. Substitute the target environment’s values for [bracketed] variables.
Identify a system that will serve as the service endpoint for the ArcGIS for Server environment. This must be an Active Directory joined Windows 2008 R2 system with IIS 7.5 or later installed.
If a Web Application Firewall (WAF), and/or Load Balancer serves as the user-connection endpoint, this system must be deployed on a trusted network behind these front-end technologies. On this system (locally), perform the following steps:
Install the “ArcGIS Web Adaptor”
Configure the “ArcGIS Web Adaptor” such that “Administration” is enabled via the Web Adaptor.
Enable Active Directory Client Certificate Authentication "To map client certificates by using Active Directory mapping."
Configure ArcGIS for Server to utilize Windows Users and Roles:
Navigate to ArcGIS Server Manager ([https://server.domain.com/arcgis]/manager). (logon when prompted.)
Navigate to the “Security” tab.
Navigate to the “Settings” sub-tab.
Edit “Configuration Settings” by clicking on the pencil icon.
Select “Users and roles from an existing enterprise system (LDAP or Windows Domain)”, then click “Next”.
Select “Windows Domain”, then click “Next”.
Supply Active Directory credentials with privileges “Logon To” the system on which ArcGIS for Server is deployed, then click “Next”.
Select “Web Tier” as the “Authentication Tier”, then click “Next” >> “Finish”.
Review the ArcGIS for Server configuration to ensure the application recognizes only system generated session identifiers. Substitute the target environment’s values for [bracketed] variables.
Navigate to [https://server.domain.com/arcgis]/admin/security/config (logon when prompted.)
Verify the “User Store Configuration” value = “Type: Windows”.
If the “User Store Configuration” value is set to “Type: Built-In”, this is a finding.
Verify the “Role Store Configuration” value = “Type: Windows”.
If the “Role store Configuration” value is set to “Type: Built-In”, this is a finding.
Verify the “Authentication Tier” value is set to “WEB_ADAPTOR”.
If the “Authentication Tier” value is set to “GIS_SERVER”, this is a finding.
This test requires the account performing the check to have "Administrator" privilege to the ArcGIS for Server site. This check can be performed remotely via HTTPS. This configuration is only valid when ArcGIS for Server has been deployed onto a Windows 2008 or later operating system that is a member of an Active Directory domain that disables identifiers that show more than 35 days of inactivity.
This control is not applicable for ArcGIS Server deployments configured to allow anonymous access.
This control is not applicable for ArcGIS Server deployments which are integrated with and protected by one or more third party DoD compliant certificate authentication solutions.
V-65477
False
AGIS-00-000098
Review the ArcGIS for Server configuration to ensure the application recognizes only system generated session identifiers. Substitute the target environment’s values for [bracketed] variables.
Navigate to [https://server.domain.com/arcgis]/admin/security/config (logon when prompted.)
Verify the “User Store Configuration” value = “Type: Windows”.
If the “User Store Configuration” value is set to “Type: Built-In”, this is a finding.
Verify the “Role Store Configuration” value = “Type: Windows”.
If the “Role store Configuration” value is set to “Type: Built-In”, this is a finding.
Verify the “Authentication Tier” value is set to “WEB_ADAPTOR”.
If the “Authentication Tier” value is set to “GIS_SERVER”, this is a finding.
This test requires the account performing the check to have "Administrator" privilege to the ArcGIS for Server site. This check can be performed remotely via HTTPS. This configuration is only valid when ArcGIS for Server has been deployed onto a Windows 2008 or later operating system that is a member of an Active Directory domain that disables identifiers that show more than 35 days of inactivity.
This control is not applicable for ArcGIS Server deployments configured to allow anonymous access.
This control is not applicable for ArcGIS Server deployments which are integrated with and protected by one or more third party DoD compliant certificate authentication solutions.
M
2961