STIGQter STIGQter: STIG Summary: CA API Gateway NDM Security Technical Implementation Guide Version: 1 Release: 1 Benchmark Date: 19 Sep 2016:

The CA API Gateway must notify System Administrators (SAs) and Information System Security Officers (ISSMs) when accounts are created, or enabled when previously disabled.

DISA Rule

SV-86163r1_rule

Vulnerability Number

V-71539

Group Title

SRG-APP-000320-NDM-000284

Rule Version

CAGW-DM-000200

Severity

CAT II

CCI(s)

Weight

10

Fix Recommendation

Install and configure (setup SNMP trap dest/authentication) alerter script in /usr/local/bin/alerter.

Run "/usr/local/bin/alerter -w" to write initial config to filesystem.

Configure cron to run "/usr/local/bin/alerter -c" every minute.

An example follows. The SNMP destination host and username/password are configured by editing the shell variables near the beginning of the script. SNMPUSER should be set to the username recognized by the SNMP Management Station. SNMPENGINEID should be set to the SNMPv3 EngineID the Management Station uses for this application. SNMPHOST should be set to the hostname of the SNMP Management Station.

This authentication configuration is placed in "/etc/snmp/snmp.conf":
-----------------------------------

defSecurityLevel authPriv
defAuthType SHA
defPrivType AES
defAuthPassphrase {password123}
defPrivPassphrase {password123}
-----------------------------------

This snmp alerter script is placed in "/usr/local/bin/alerter script":
--------

#!/bin/bash

This script implements watching for changes in a system that may indicate unauthorized changes have been made to the system. It is designed to be run as "alerter -w" to capture the current configuration and then to be run out of cron on a regular basis as "alerter -c", which then compares the current configuration to the previously captured configuration.

If the configuration has changed, an SNMP TRAP is sent using the "SNMPBASECMD" variable as the base "snmptrap" command.
# SNMPBASECMD will have to be configured appropriately depending on the exact SNMPv3 security
# implemented on the SNMP Management Server.
#
# The script uses "/var/run/alerter" as a base directory to capture filesystem timestamps and
# the installed RPM software list.

SNMPUSER=myuser
SNMPENGINEID=0x0102030405
SNMPHOST=rsbfreebsd.ca.com

SNMPENTNUM="1.3.6.1.4.1.17304"
SNMPNOTIF=".7.3.128"
SNMPBASECMD="snmptrap -v 3 -n \"\" -u ${SNMPUSER} -e ${SNMPENGINEID} ${SNMPHOST} 0 ${SNMPENTNUM}.7.3.128.0 ${SNMPENTNUM}.7.3.129.0 s"

ALERTER_ROOT=/var/run/alerter

ACCOUNTFILES=("/etc/passwd" "/etc/shadow" "/etc/group")

TSFILE=timestamps
RPMFILE=rpmlist

function usage {
echo "$0 [-w | -c]"
echo " -w - Write data"
echo " -c - Compare current to data"
echo " (at least one must be selected)"
echo
}

function writeTsSummary {
for file in ${ACCOUNTFILES[*]}
do
ts=$(stat -c '%Y' $file)
echo $file $ts >> $ALERTER_ROOT/$TSFILE
done
}

function writeRpmSummary {
rpm -qa >> $ALERTER_ROOT/$RPMFILE
}

function writeSummaries {

if [ ! -d $ALERTER_ROOT ]
then
mkdir $ALERTER_ROOT
fi

rm -f $ALERTER_ROOT/$TSFILE $ALERTER_ROOT/$RPMFILE

writeTsSummary
writeRpmSummary
}

Check Contents

Verify "/usr/local/bin/alerter" script exists and is executable.

Verify crontab runs "/usr/local/bin/alerter" every minute by checking cron's logfile /var/log/cron.

If the "/usr/local/bin/alerter" script does not exist, this is a finding.

If the "/usr/local/bin/alerter" script does not run every minute as a cron job, this is a finding.

An example follows. The SNMP destination host and username/password are configured by editing the shell variables near the beginning of the script. SNMPUSER should be set to the username recognized by the SNMP Management Station. SNMPENGINEID should be set to the SNMPv3 EngineID the Management Station uses for this application. SNMPHOST should be set to the hostname of the SNMP Management Station.

This authentication configuration is placed in "/etc/snmp/snmp.conf":
-----------------------------------
defSecurityLevel authPriv
defAuthType SHA
defPrivType AES
defAuthPassphrase {password123}
defPrivPassphrase {password123}
-----------------------------------

This snmp alerter script is placed in "/usr/local/bin/alerter script":
--------
#!/bin/bash

#
# This script implements watching for changes in a system that may indicate unauthorized
# changes have been made to the system
#
# It is designed to be run as "alerter -w" to capture the current configuration and
# then to be run out of cron on a regular basis as "alerter -c" which then compares the
# current configuration to the previously captured configuration. If the configuration
# has changed an SNMP TRAP is sent using the SNMPBASECMD variable as the base snmptrap command.
# SNMPBASECMD will have to be configured appropriately depending on the exact SNMPv3 security
# implemented on the SNMP Management Server.
#
# The script uses /var/run/alerter as a base directory to capture filesystem timestamps and
# the installed RPM software list.

SNMPUSER=myuser
SNMPENGINEID=0x0102030405
SNMPHOST=rsbfreebsd.ca.com

SNMPENTNUM="1.3.6.1.4.1.17304"
SNMPNOTIF=".7.3.128"
SNMPBASECMD="snmptrap -v 3 -n \"\" -u ${SNMPUSER} -e ${SNMPENGINEID} ${SNMPHOST} 0 ${SNMPENTNUM}.7.3.128.0 ${SNMPENTNUM}.7.3.129.0 s"

ALERTER_ROOT=/var/run/alerter

ACCOUNTFILES=("/etc/passwd" "/etc/shadow" "/etc/group")

TSFILE=timestamps
RPMFILE=rpmlist

function usage {
echo "$0 [-w | -c]"
echo " -w - Write data"
echo " -c - Compare current to data"
echo " (at least one must be selected)"
echo
}

function writeTsSummary {
for file in ${ACCOUNTFILES[*]}
do
ts=$(stat -c '%Y' $file)
echo $file $ts >> $ALERTER_ROOT/$TSFILE
done
}

function writeRpmSummary {
rpm -qa >> $ALERTER_ROOT/$RPMFILE
}

function writeSummaries {

if [ ! -d $ALERTER_ROOT ]
then
mkdir $ALERTER_ROOT
fi

rm -f $ALERTER_ROOT/$TSFILE $ALERTER_ROOT/$RPMFILE

writeTsSummary
writeRpmSummary
}

Vulnerability Number

V-71539

Documentable

False

Rule Version

CAGW-DM-000200

Severity Override Guidance

Verify "/usr/local/bin/alerter" script exists and is executable.

Verify crontab runs "/usr/local/bin/alerter" every minute by checking cron's logfile /var/log/cron.

If the "/usr/local/bin/alerter" script does not exist, this is a finding.

If the "/usr/local/bin/alerter" script does not run every minute as a cron job, this is a finding.

An example follows. The SNMP destination host and username/password are configured by editing the shell variables near the beginning of the script. SNMPUSER should be set to the username recognized by the SNMP Management Station. SNMPENGINEID should be set to the SNMPv3 EngineID the Management Station uses for this application. SNMPHOST should be set to the hostname of the SNMP Management Station.

This authentication configuration is placed in "/etc/snmp/snmp.conf":
-----------------------------------
defSecurityLevel authPriv
defAuthType SHA
defPrivType AES
defAuthPassphrase {password123}
defPrivPassphrase {password123}
-----------------------------------

This snmp alerter script is placed in "/usr/local/bin/alerter script":
--------
#!/bin/bash

#
# This script implements watching for changes in a system that may indicate unauthorized
# changes have been made to the system
#
# It is designed to be run as "alerter -w" to capture the current configuration and
# then to be run out of cron on a regular basis as "alerter -c" which then compares the
# current configuration to the previously captured configuration. If the configuration
# has changed an SNMP TRAP is sent using the SNMPBASECMD variable as the base snmptrap command.
# SNMPBASECMD will have to be configured appropriately depending on the exact SNMPv3 security
# implemented on the SNMP Management Server.
#
# The script uses /var/run/alerter as a base directory to capture filesystem timestamps and
# the installed RPM software list.

SNMPUSER=myuser
SNMPENGINEID=0x0102030405
SNMPHOST=rsbfreebsd.ca.com

SNMPENTNUM="1.3.6.1.4.1.17304"
SNMPNOTIF=".7.3.128"
SNMPBASECMD="snmptrap -v 3 -n \"\" -u ${SNMPUSER} -e ${SNMPENGINEID} ${SNMPHOST} 0 ${SNMPENTNUM}.7.3.128.0 ${SNMPENTNUM}.7.3.129.0 s"

ALERTER_ROOT=/var/run/alerter

ACCOUNTFILES=("/etc/passwd" "/etc/shadow" "/etc/group")

TSFILE=timestamps
RPMFILE=rpmlist

function usage {
echo "$0 [-w | -c]"
echo " -w - Write data"
echo " -c - Compare current to data"
echo " (at least one must be selected)"
echo
}

function writeTsSummary {
for file in ${ACCOUNTFILES[*]}
do
ts=$(stat -c '%Y' $file)
echo $file $ts >> $ALERTER_ROOT/$TSFILE
done
}

function writeRpmSummary {
rpm -qa >> $ALERTER_ROOT/$RPMFILE
}

function writeSummaries {

if [ ! -d $ALERTER_ROOT ]
then
mkdir $ALERTER_ROOT
fi

rm -f $ALERTER_ROOT/$TSFILE $ALERTER_ROOT/$RPMFILE

writeTsSummary
writeRpmSummary
}

Check Content Reference

M

Target Key

3051

Comments