SV-89415r1_rule
V-74741
SRG-APP-000358-AS-000064
MQMH-AS-000150
CAT II
10
To configure HA:
1. Use three Ethernet cables to directly connect two appliances together using ports eth1, eth2, and eth3.
2. Configure the three connected MQ Appliance ports (on both appliances) as follows:
Interface Purpose IP address/CIDR
eth1 HA group primary interface x.x.x.x/24
eth2 HA group alternative interface x.x.x.x/24
eth3 HA Replication interface x.x.x.x/24
On the second appliance, enter the following command from the MQ Appliance CLI:
prepareha -s [SecretText] -a [eth 1 IPAddress of first appliance] [-t timeout]
On the first appliance, enter the following command from the MQ Appliance CLI:
crthagrp -s [SecretText] -a [eth 1 IPAddress of second appliance]
crtmqm [HA QM name] –p [port] –sx
Note: The queue manager’s data (queues, queue messages, etc.) is replicated from the appliance in the primary HA role (first appliance) to the appliance in the secondary HA role (second appliance).
Review system categorization to determine if redundancy is a requirement. If system categorization does not specify redundancy, interview system administrator to determine how they have configured the MQ appliance to off-load log files onto a different system.
Perform on each member of the HA pair.
To access the MQ Appliance CLI, enter:
mqcli
dspmq -s -o ha
One of the appliances should be running as primary, the other as secondary.
If HA is not configured with the primary and secondary running, or if there is no mechanism implemented to off-load log records, this is a finding.
V-74741
False
MQMH-AS-000150
Review system categorization to determine if redundancy is a requirement. If system categorization does not specify redundancy, interview system administrator to determine how they have configured the MQ appliance to off-load log files onto a different system.
Perform on each member of the HA pair.
To access the MQ Appliance CLI, enter:
mqcli
dspmq -s -o ha
One of the appliances should be running as primary, the other as secondary.
If HA is not configured with the primary and secondary running, or if there is no mechanism implemented to off-load log records, this is a finding.
M
3239