SV-90927r1_rule
V-76239
SRG-APP-000374-NDM-000299
CACT-NM-000007
CAT II
10
Configure CounterACT to record time stamps for audit records that can be mapped to UTC.
Note: Updating time preferences will force CounterACT into maintenance mode. Use a scheduled outage for planned maintenance and stop CounterACT service prior to adjusting time settings.
1. After logon, type the following command at the prompt using the IP address of the required NTP server:
fstool ntp <ip address>
2. Ensure the date references accurate time and the time zone points to UTC next to the year.
Determine if CounterACT records time stamps for audit records that can be mapped to UTC. This requirement may be verified by demonstration or configuration review.
Verify by connecting to the appliance via SSH using standard user/operator privilege.
1. After logon, type the following command at the prompt using the IP address of the configured NTP server:
fstool ntp test <ip address>
2. Verify the date references accurate time and the time zone points to UTC next to the year.
If CounterACT does not record time stamps for audit records that can be mapped to UTC, this is a finding.
V-76239
False
CACT-NM-000007
Determine if CounterACT records time stamps for audit records that can be mapped to UTC. This requirement may be verified by demonstration or configuration review.
Verify by connecting to the appliance via SSH using standard user/operator privilege.
1. After logon, type the following command at the prompt using the IP address of the configured NTP server:
fstool ntp test <ip address>
2. Verify the date references accurate time and the time zone points to UTC next to the year.
If CounterACT does not record time stamps for audit records that can be mapped to UTC, this is a finding.
M
3225