STIGQter: STIG Summary: DBN-6300 NDM Security Technical Implementation Guide Version: 1 Release: 1 Benchmark Date: 12 Sep 2017:

The DBN-6300 must initiate session auditing upon startup.

DISA Rule

SV-91627r1_rule

Vulnerability Number

V-76931

Group Title

SRG-APP-000092-NDM-000224

Rule Version

DBNW-DM-000026

Severity

CAT III

CCI(s)

• CCI-001464 - The information system initiates session audits at system start-up.

Weight

10

Fix Recommendation

Configure the DBN-6300 to be connected to the syslog server. Also configure the DBN-6300 to include audit records in the syslog message feed.

Navigate to Settings >> Advanced >> Syslog.

Enter the syslog connection information (port and IP address) and push the "enabled" button for both "TCP" and "enable".

Navigate to Settings >> Advanced >> Audit Log.

Verify that the Audit Syslog, "Use System Syslog" button is set to "Yes" and the Audit Configuration Categories are all checked for Audit Log, Syslog, and Audit Console.

If the "Use System Syslog" button is not set to "Yes", press the "Yes" button.

Click on "Commit".

Check Contents

Navigate to Settings >> Advanced >> Syslog.

Verify that the syslog services are set to "on", the syslog server information is valid, and the syslog server has connected.

Navigate to Settings >> Advanced >> Audit Log.

Verify that the Audit Syslog, "Use System Syslog" button is set to "Yes" and the Audit Configuration Categories can be checked in accordance with the role assigned. For an administrator, the admin role should allow all categories to be checked for Audit Log, Syslog, and Audit Console.

Log off and log on to the system again. Examine the message at the syslog server.

If there is no message, or no information in the message containing data showing the logon, this is a finding.

Vulnerability Number

V-76931

Documentable

False

Rule Version

DBNW-DM-000026

Severity Override Guidance

Navigate to Settings >> Advanced >> Syslog.

Verify that the syslog services are set to "on", the syslog server information is valid, and the syslog server has connected.

Navigate to Settings >> Advanced >> Audit Log.

Verify that the Audit Syslog, "Use System Syslog" button is set to "Yes" and the Audit Configuration Categories can be checked in accordance with the role assigned. For an administrator, the admin role should allow all categories to be checked for Audit Log, Syslog, and Audit Console.

Log off and log on to the system again. Examine the message at the syslog server.

If there is no message, or no information in the message containing data showing the logon, this is a finding.

Check Content Reference

M

Target Key

2947

Comments