| Checked | Name | Title |
|---|
| ☐ | SV-80451r1_rule | The HP FlexFabric Switch must be configured to disable non-essential capabilities. |
| ☐ | SV-80541r1_rule | HP FlexFabric Switch must authenticate all network-connected endpoint devices before establishing any connection. |
| ☐ | SV-80547r1_rule | The HP FlexFabric Switch must manage excess bandwidth to limit the effects of packet flooding types of denial of service (DoS) attacks. |
| ☐ | SV-80549r1_rule | The HP FlexFabric Switch must provide the capability for authorized users to select a user session to capture. |
| ☐ | SV-80551r1_rule | The HP FlexFabric Switch must provide the capability for authorized users to remotely view, in real time, all content related to an established user session from a component separate from the HP FlexFabric Switch. |
| ☐ | SV-80553r1_rule | The HP FlexFabric Switch must have Root Guard enabled on all ports where the root bridge should not appear. |
| ☐ | SV-80555r1_rule | The HP FlexFabric Switch must have BPDU Guard enabled on all user-facing access ports. |
| ☐ | SV-80557r1_rule | The HP FlexFabric Switch must have STP Loop Protection enabled all non-designated STP switch ports. |
| ☐ | SV-80559r1_rule | The HP FlexFabric Switch must have unknown storm-constrain enabled. |
| ☐ | SV-80561r1_rule | The HP FlexFabric Switch must have DHCP snooping for all user VLANs to validate DHCP messages from untrusted sources as well as rate-limit DHCP traffic. |
| ☐ | SV-80563r1_rule | The HP FlexFabric Switch must have IP Source Guard enabled on all user-facing or untrusted access switch ports. |
| ☐ | SV-80565r1_rule | The HP FlexFabric Switch must have Dynamic ARP Inspection (DAI) enabled on all user VLANs. |
| ☐ | SV-80567r1_rule | The HP FlexFabric Switch must implement Rapid STP where VLANs span multiple switches with redundant links. |
| ☐ | SV-80569r1_rule | The HP FlexFabric Switch must enable Device Link Detection Protocol (DLDP) to protect against one-way connections. |
| ☐ | SV-80571r1_rule | The HP FlexFabric Switch must have all trunk links enabled statically. |
| ☐ | SV-80575r1_rule | The HP FlexFabric Switch must have all disabled switch ports assigned an unused VLAN. |
| ☐ | SV-80577r1_rule | The HP FlexFabric Switch must not have the default VLAN assigned to any host-facing switch ports. |
| ☐ | SV-80579r1_rule | The HP FlexFabric Switch must have the default VLAN pruned from all trunk ports that do not require it. |
| ☐ | SV-80581r1_rule | The HP FlexFabric Switch must not use the default VLAN for management traffic. |
| ☐ | SV-80583r1_rule | The HP FlexFabric Switch must have all user-facing or untrusted ports configured as access switch ports. |
| ☐ | SV-80585r1_rule | The HP FlexFabric Switch must have the native VLAN assigned to a VLAN ID other than the default VLAN ID for all 802.1q trunk links. |
| ☐ | SV-80587r1_rule | The HP FlexFabric Switch must not have any access switch ports assigned to the native VLAN. |
STIGQter: STIG Summary: